I have completed the next section! Section 7 adds a bunch of auxillary components to the engine, and I guess is a fairly straightforward section. The engine, at the completion of Section 7, now looks like this: A couple of small elements - a clear yellow pipe, and some electrical cabling - are still to … Continue reading [Episode 17] Section 7 – More engine
The first complete section of the do-over is complete - Section 6, which is the engine block build. This is the first assembly completed as I need the block, plus a few other parts which mount it to the body, so I can test the fit the engine and transmission to the body. Photos of … Continue reading [Episode 14] Section 6 (Engine block) completed!
A short update on the engine. All parts for the short block - Section 6 - and for the engine accessories added as Section 7 are now ready for paint. These parts are all metal - white metal and some alumnium shims - and have been cleaned up, drilled, test fit, polished... There are 35 … Continue reading [11 1/2] Preparing engine parts
With the engine block shims in place, and one of the mounting brackets modified, we can finally test that the engine block will fit to the top and bottom plates, air intake and exhaust manifolds. We'll do this by keeping the block mounted to the fuel cell (RE12), which will also let us check the … Continue reading [10 1/2] Test fitting the engine
SO, happily test fitting parts to the engine block, I discover that bracket M253 does not fit. This bracket helps hold the block and engine top plate to the fuel cell/firewall. I looked at the wreckage of my first attempt building this kit and it seems that if one can get the bracket to fit … Continue reading [10] Test fitting the engine: another part that doesn’t fit
Jason's Mazda 787B Build 